Average customer rating: |
Transition Networks SGFEB1029-101 1Gbps Ethernet Media Converter
Manufacturer: TRANSITION NETWORKS ProductGroup: CE Binding: Electronics ASIN: B0001XGQMC |
Product Description
10/100/1000 media converter that converts the electrical signal of a 10/100/1000 Ethernet signal from copper to fiber. This solution will offer a low-cost integration option for network managers who want to migrate from 10/100 networks to Gigabit Ethernet. Gigabit only switches can now be connected to 10/100 networks without the need to upgrade the 10/100 side, allowing network managers to add new equipment gradually.
Average customer rating: |
Transition Just Convert-IT Stand-Alone Media Converter - media converter ( J/E-CX-TBT-02 )
Manufacturer: TRANSITION NETWORKS ProductGroup: CE Binding: Electronics Product Features:
ASIN: B000BVM880 |
Product Description
Simply upgrade twisted pair networks to fiber and end the problems of difficult installations associated with traditional converters. The "Just Convert-IT" line of media converters is there for when you want an inexpensive, no frills converter that offers the same quality and reliability as Transition Networks' full-featured line of products.PRODUCT FEATURES:Supports up to 24 devices daisy chained on one coax segment per twisted pair segment;MDI/MDI-X switch allows converter to be connected to either a workstation NIC or hub, or switches and routers without changing the cable type.
Average customer rating: |
Transition Networkx SGFEB1013-100 Media Converter
Manufacturer: TRANSITION NETWORKS ProductGroup: CE Binding: Electronics Product Features:
ASIN: B0000A4F28 |
Product Description
SGFEB1015-100 media converter converts the electrical signal of a 10/100/1000 Ethernet signal from copper to fiber. This solution will offer a low-cost integration option for network managers who want to migrate from 10/100 networks to Gigabit Ethernet. Gigabit only switches can now be connected to 10/100 networks without the need to upgrade the 10/100 side, allowing network managers to add new equipment gradually. Fiber interface runs at 1000Base speeds, which enables users to connect Gigabit ports on fiber switches. Fiber connectivity options include SX optics and LX dual fiber with distances up to 65km or single fiber up to 40km.
Average customer rating: |
Transition Networks CPSMC0200-200 5.5" Modular Expansion Base
Manufacturer: TRANSITION NETWORKS ProductGroup: CE Binding: Electronics Product Features:
ASIN: B00006HS3M |
Product Description
Transition Networks develops and distributes media and rate conversion tools that enable today's and tomorrow's bandwidth growth requirements. The company's products are designed to protect the investment made in network infrastructure while optimizing its performance capacity. Point System is the next generation in media conversion brought to market by Transition Networks, the established leader in media conversion. It is a comprehensive media conversion system serving the commercial, residential and Telco markets.Transition Networks enhanced management software allows customers to monitor, configure, and control their media converters using SNMP management. The Point System's design allows a network administrator to connect up to 8 chassis utilizing one primary management card and the necessary expansion cards. Add another primary card and the stack now has redundant management capabilities in the rare event of a management module failure.
Average customer rating: |
100btx To 100bfx Standalone St 1300nm 2km
Manufacturer: TRANSITION NETWORKS ProductGroup: CE Binding: Electronics Product Features:
ASIN: B000067T6M |
Product Description
Transition Networks' 100BASE-TX to 100BASE-FX Media Converter is available in both stand-alone and slide-in-module form factors; making cost-effective integration of twisted pair and fiber optics in Fast Ethernet networks easier than ever before.The Media Converter operates under heavy traffic loads without excess heat so there is no need for a failure-prone internal fan. It automatically detects and reports loss of link on a connection using Link Pass Through. This feature allows the equipment at the remote end of a link failure to "see" this failure and respond with corrective actions, such as Spanning Tree fail-over links, proprietary trunking links, or failure reports through SNMP or RMON procedures built into the switch, router or hub. The Media Converter also automatically detects faults in a link using Far End Fault. This feature of the Fast Ethernet Fiber standard allows you to troubleshoot a fault, even if it is only in one direction; alerting the device on the same side as the failure. The converter will automatically re-establish link when connected to two 10/100 auto-negotiating switches if link is lost. With other manufacturers' converters the user must intervene to re-establish link. Pause is a component of Auto-negotiation and because auto-negotiation is not supported over a fiber link, switches cannot utilize this flow control feature without Transition Networks' converters. Enabling the Pause feature on the converters between two switches allows users to take advantage of this flow control feature on their equipment.
Average customer rating: |
100btx To 100bfx Standalone Sc
Manufacturer: TRANSITION NETWORKS ProductGroup: CE Binding: Electronics Product Features:
ASIN: B000067T6Q |
Product Description
Transition Networks' 100BASE-TX to 100BASE-FX Media Converter is available in both stand-alone and slide-in-module form factors; making cost-effective integration of twisted pair and fiber optics in Fast Ethernet networks easier than ever before.The Media Converter operates under heavy traffic loads without excess heat so there is no need for a failure-prone internal fan. It automatically detects and reports loss of link on a connection using Link Pass Through. This feature allows the equipment at the remote end of a link failure to "see" this failure and respond with corrective actions, such as Spanning Tree fail-over links, proprietary trunking links, or failure reports through SNMP or RMON procedures built into the switch, router or hub. The Media Converter also automatically detects faults in a link using Far End Fault. This feature of the Fast Ethernet Fiber standard allows you to troubleshoot a fault, even if it is only in one direction; alerting the device on the same side as the failure. The converter will automatically re-establish link when connected to two 10/100 auto-negotiating switches if link is lost. With other manufacturers' converters the user must intervene to re-establish link. Pause is a component of Auto-negotiation and because auto-negotiation is not supported over a fiber link, switches cannot utilize this flow control feature without Transition Networks' converters. Enabling the Pause feature on the converters between two switches allows users to take advantage of this flow control feature on their equipment.
Average customer rating: |
Transition Networks CPSMC0800-100 8-Slot Modular Expansion Base
Manufacturer: TRANSITION NETWORKS ProductGroup: CE Binding: Electronics Product Features:
ASIN: B00009YW8J |
Product Description
Transition Networks' new 8-slot chassis was designed on the same platform as the other Point System chassis and will accommodate the same modular cards. The main difference is that the cards now mount horizontally, much the same as they do in the dual-slot and single-slot chassis, but different than the vertical mounting found in the 19-slot, 18-slot and 13-slot chassis. The 8-slot chassis is only 10.5" deep and takes up only one rack unit of space (1.75" high) compared to the two rack units (3.5" high) needed for the larger chassis.The new 8-slot chassis, as well as the other Point System chassis, allow for complete read/write management of all of Transition's chassis-based media converters. All management functionality is provided through the use of either a single-slot management card or a dual-slot base/single slot expansion management card configuration for the ability to manage multiple stacked or remote chassis. Media converter chassis and cards can be managed using the stand-alone, Windows-based FocalPoint software application, as well as via a standard browser with the Web-based management tool or through the command line interface (CLI). FocalPoint offers full SNMP read/write management capabilities via a user-friendly graphical user interface (GUI), which is also supported on industry-leading network management platforms such as HP Openview, Sun Solaris, and Windows NT.
Average customer rating: |
Transition Networks J/FE-CF-03 Fast-Ethernet 100BASE-TX to 100BASE-FX Media Converter
Manufacturer: TRANSITION NETWORKS ProductGroup: CE Binding: Electronics Product Features:
ASIN: B0000B16GK |
Product Description
Simply upgrade twisted pair networks to fiber and end the problems of difficult installations associated with traditional converters. The "Just Convert-IT" line of media converters is there for when you want an inexpensive, no frills converter that offers the same quality and reliability as Transition's full-featured line of products.Used in pairs, this media converter can extend distances between two twisted pair switches or between a switch and a server. Using one media converter, a switch with a copper port can be connected to a switch with an existing fiber interface.
Average customer rating: |
Transition Networks CGFEB1014-100 1Gbps Ethernet 1000Base-LX Media Converter
Manufacturer: TRANSITION NETWORKS ProductGroup: CE Binding: Electronics Product Features:
ASIN: B0000A4F1J |
Product Description
SGFEB1015-100 media converter converts the electrical signal of a 10/100/1000 Ethernet signal from copper to fiber. This solution will offer a low-cost integration option for network managers who want to migrate from 10/100 networks to Gigabit Ethernet. Gigabit only switches can now be connected to 10/100 networks without the need to upgrade the 10/100 side, allowing network managers to add new equipment gradually. Fiber interface runs at 1000Base speeds, which enables users to connect Gigabit ports on fiber switches. Fiber connectivity options include SX optics and LX dual fiber with distances up to 65km or single fiber up to 40km.
Average customer rating: |
Transition Networks E-100BTX-FX-05(HT) 100Mbps Fast Ethernet Wired Media Converter
Manufacturer: TRANSITION NETWORKS ProductGroup: CE Binding: Electronics Product Features:
ASIN: B0000A3H0V |
Product Description
Transition Networks' 100BASE-TX to 100BASE-FX Media Converter makes cost-effective integration of twisted pair and fiber optics in Fast Ethernet networks easier than ever before.Used in pairs, this media converter can extend distances between two twisted pair switches or a switch and a server up to 2,000 meters over multimode fiber, or up to 80,000 meters over single mode fiber. Using one media converter, a switch with a copper port can be connected to a switch with an existing fiber interface.
Average customer rating:
|
NEC MultiSync FE700 Totally Flat 17" CRT Monitor (PC/Mac)
Manufacturer: NEC ProductGroup: CE Binding: Electronics Accessories:
Product Features:
ASIN: B00004SYNL |
Product Description
NEC Technologies new perfectly flat-faced MultiSync FE700 monitor delivers outstanding features and benefits to business, home and education. This value-priced perfectly flat aperture grille 17-inch (16-inch viewable) monitor offers improved image quality, an 85% reduction in glare, as well as improved brightness and contrast over traditional CRT technology.Amazon.com Product Description
NEC's MultiSync FE700 offers a totally flat 17-inch screen (16 inches viewable) for comfortable viewing. It's also an affordable option for small-business offices and home users who need the advantages of detailed text and brilliant color graphics in high resolution. An antistatic, antiglare screen treatment reduces reflection while providing total use of the full display area.The NEC MultiSync FE700 provides crisp, clear images with a maximum resolution of 1,280 x 1,024 at a modest 66 Hz refresh rate combined with a 0.25-millimeter dot pitch. (Faster refreshing is available at lower resolutions.) With MultiSync FE700's front-bezel and onscreen controls, you'll have easy and convenient access to brightness and contrast, image size and position, screen geometry, and color preferences.
High-resolution capabilities, top image quality, and small-business accessibility are united in the FE700 to ensure that your crucial data and images are precisely displayed. The dark-tint screen of the FE700 is designed with a multilayer screen coating and OptiClear viewing. The unit is both PC and Macintosh compatible. On-the-desk dimensions are approximately 21 by 22 by 23 inches; weight is a substantial 51 pounds. The monitor parts, labor, and picture tube are supported by a three-year limited warranty.
Customer Reviews:
I love this monitor.......2001-12-02
Best of Show.......2001-07-28
This monitor is a dream. Setup time was les than a minute, and Windows detected it for what it was, and not a generic monitor. It is perfect for what I use it for-word processing, games, and a little graphics work in PhotoShop. Itýs superb color coupled with NECýs high quality construction and reputation make this display not only good value, but a good investment. Sure there are ýbiggerý monitors, but how good are they? I have seen several people with the Samsung 950p and I believe the NEC FE700+ gives a superior image quality and is only 2ý small in screen size. And hey, itýs Macintosh compatible, which means you can do away with those silly and cheap looking clear plastic boxes. I highly recommend this monitor.
NEC FE700.......2001-05-15
great monitor, excellent colors....very sharp res........2000-10-16
Electronics: